LVR-5000
5A Switching Regulator (6.7V) for Li-Po Rx Packs (For Spectrum 2.4GHz & Futaba PCM only)

Regulator Technology: Switching
Assembly Technology: Surface mount
Weight (including wire and connector) : 9 grams
Dimension (excluding wire and connector): 20 x 40 x 7 mm
Output voltage: 6.7 Volts
Max continuous current: 5 Amp
Input Connector: JST - RCY Polarized
Output Connector: 'J' Type
Wire length: 12 cm
Recommended Application: 1/10th GP and 1/8th GP On-road and Off-road

A breakthrough in R/C car racing with Li-Po Technology! The 5 Amp regulator was designed specifically targeting the 1/10 & 1/8 class for both on-road and off-road. Advancement in servo technology has brought more powerful and reliable servos into the race arena but with one drawback – ‘power consumption’. These servos draw more current than their predecessors and therefore need higher capacity batteries. That is why manufacturers are pushing for higher capacity receiver batteries for racing.

The VXR advantage:
This is where VXR Racing steps in pushing the envelope further in battery technology to achieve maximum racing performance. Below is the advantage of running this regulator with any one of our VXR Racing Li-Po pack:

1) You will have consistency in steering torque and speed throughout the race. Braking and throttle servo performance will stay consistent all the way. Why this happens is because the regulator maintains a constant voltage (6.7) at any level of current draw, up to 5amp. With NiMh, as soon as there is current draw (servo movement) the supplied voltage dips and that causes a change in speed and the holding power of your servos, affecting your response to steering input. Consistency wins races!
2) Improved runtime
3) Reduced overall weight of your race car.

Compatibility:
LVR-5000 is only compatible with the following RC Controllers:
1) Any Controllers with Spectrum 2.4GHz modules
2) Futaba PCM

VXR Racing does not recommend the unit to any other RC Controllers

Features:
Li-Po low voltage detection - red LED will light up when detecting Li-Po battery voltage is 6.2v or lower. This is to prompt the user to recharge the Li-Po battery. The system will continue to function until the voltage drops below your electronics’ minimum operating voltage.
Functional LED - a green LED will light up when it is powered up to show the unit is functioning.
Clear heat shrink protection - It allows the LED to be viewed clearly.
Single sided SMT - while SMT technology ensures high quality and consistency, the single sided assembly allows the bottom of the regulator to be flat for easy mounting with double sided tape.
No switch equals less problems. Switches are frequently a reliability issue. In racing, reliability is more important than convenience, therefore the lack of a switch in this product.

Moving on to VXR Li-Po Technology and our 5Amp Switching Regulator system to power your electronics in your race car is the ultimate performance upgrade. Keeping the input voltage constant at 6.7V throughout your qualifiers and finals and assurance that your receiver battery won’t dump on you for the duration of the race will give a racer a better chance of finishing at the top. Unleash the Power!