|
Now its single firmware can be compatible with all speed controllers! THIS ADVANCED PROGRAM BOX IS USED TO SET THE PROGRAMMABLE PARAMETERS OF BRUSHLESS ESC, IT HAS A 16*2 CHARACTERS LCD (LIQUID CRYSTAL DISPLAY) TO GET A FRIENDLY USER INTERFACE, SO YOU CAN SET THE PROGRAMMABLE PARAMETERS VERY EASILY. IT IS POCKET-SIZED, SO YOU CAN BRING IT TO THE RACING OR FLYING FIELD CONVENIENTLY.1 Working Mode + 1.1 Working as an individual device to set the ESC, the value of each parameter is displayed on its own LCD.
+ 1.2 Working as an USB adapter to link the ESC with a PC, and the user can update the firmware of the ESC or set the ESC by the special application software on PC. + 1.3 Works as a Lipo battery voltmeter to measure the voltage of the whole battery pack and each cell.
2 Specifications:
+ 2.1 Size: 90mm (L) * 51mm (W) * 17mm (H) + 2.2 Weight: 84g. + 2.3 Input Voltage: 4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box) 3 Programmable Items:
This program card is suitable for the following ESCs: + 1. PLATINUM Series Helicopter/Aircraft ESC + 2. XERUN Series Car ESC (Version 3.0) + 3. EZRUN Series Car ESC (Version 2.0)
A) The programmable items for the CAR ESC are:
+ 3.1 Running Mode
+ 3.2 Drag Brake Force
+ 3.3 Low Voltage Cut-Off Threshold
+ 3.4 Start Mode
+ 3.5 Maximum Brake Force
+ 3.6 Maximum Reverse Force
+ 3.7 Initial Brake Force
+ 3.8 Throttle Neutral Range
+ 3.9 Timing
+ 3.10 Over-Heat Protection
+ 3.11 Motor Rotation
+ 3.12 Lipo Cells B) The programmable items for the AIRCRAFT AND HELICOPTER ESC are:
+ 3.1 Brake Setting
+ 3.2 Battery Type
+ 3.3 Low Voltage Protection Mode (Cutoff Mode)
+ 3.4 Low Voltage Protection Threshold (Cutoff Threshold)
+ 3.5 Start Mode
+ 3.6 Timing
+ 3.7 Governor Mode
+ 3.8 Motor Type
+ 3.9 PWM Frequency
+ 3.10 Built-In BEC Output
+ 3.11 Motor Load
+ 3.12 Lipo Cells 4 Application Software of the Advanced Professional LCD Program Box A PDF reader is needed to open the user manual. Please click the icon to download it. ![]() User Manual of the Multifunction LCD Program Box![]()
User Manual of the USB LINK SOFTWARE ![]() |