Rear end

The rear end of the Serpent S400 has been designed for high performance and ease of maintenance. The rear bearing blocks have been designed in 2 pieces which allows the topside to be simply removed with 4 screws, giving you easy access to the differential for maintenance or adjustment. All the parts have been machined from aluminium and have anodized in gun metal grey.

Rear suspension

The rear end of the S400 features strong 1-piece lower wishbones and aluminium uprights. As with all the wishbones on the car, the lower wishbones can be used on both the left and right sides, minimizing the number of spare parts needed to bring to the track. The rear upright features a pivot pin mounting point on the bottom and three upper camber link mounting holes for fine-tuning camber rise.

Rear Differential

The kit version of the S400 comes supplied with a lightweight and smooth rear ball differential. The diff halves are made from hard anodised aluminium which is lightweight yet extremely strong, while the use of high quality balls and steel plates ensure a long lasting and smooth diff action.

Drive train

The S400 drive train utilizes a 2-belt system with rear ball differential and front spool, while 4 CVD (constant velocity drives) transfer the power to the wheels. The motor, which is mounted to an aluminium plate, powers the main spur gear and hard anodised aluminium pulleys.

Front suspension

Similar to the rear suspension in configuration, the front suspension sports a lower composite wishbone while the upper camber adjustment is handled using a track rod which is solid, lightweight and can easily handle impacts.

Front C-hub system

A standard system on all high-end touring cars, the S400 features a front C-hub system, which is a lighter alternative to a pivot ball steering system. The car comes standard with a 4-degree caster block but is also supplied with a pair of 2 and 6-degree blocks.

Servo Saver

The servo saver on the S400 features 4 steering rod mounting points to allow the user to easily adjust the cars Ackerman. The servo saver system itself features a nut for adjusting the spring tension of the saver.

Chassis

The chassis plate has been machined from a plate of 2.5mm thick carbon fibre, which creates a perfect platform for the cars electronics as well as stiff structure, especially when combined with the equally rigid 2.5mm thick carbon fibre top deck. All holes in the base of the chassis have been countersunk while on the top of the plate, the area around the motor has been milled down to allow it to sit as low as possible. The plate features cooling holes below the motor and speed controller.

Anti-roll bars

The S400 is supplied with colour coded anti-roll bars front and rear that are held in place using a 2 piece anti-roll bar mount. The anti-roll bars are available in a number of thicknesses and are connected to the wishbones using short adjustable track rods. Stiffness is quickly and easily adjustable by changing the linkage mounting points on the lower wishbones or alternatively by changing the position of the ball joint pivot point on the roll bar itself.

RCC Shock absorbers

The RCC shock absorbers are the smoothest and easiest to build shocks ever designed. Machined from aluminium and unique in that the shock bodies only open on the bottom half, they are really simple to assemble. The result is an ultra-smooth and air-free shock absorber thanks to the self-bleeding system incorporated into the design. The shocks are supplied with 4 different shock pistons.

Another great benefit is that these shock absorbers come pre-assembled in the kit, so you need only add shock oil.

Front axle

The car comes supplied with a front spool which has been made from hard anodised aluminium while its shape has been optimised to ensure that the part is as light as possible without compromising strength. The drive is provided through the attached pulley into the lightened steel drive cups, which are held in place using steel pins.

Shock towers

The Serpent S400 features 2.5mm thick carbon fibre shock towers on the front and rear of the car. Each tower sports numerous holes for adjustment of the shock absorber angle while the rear tower also acts as the mount for the rear body posts and the front tower accommodates a 3rd front body post.

CVDs

This car is supplied with a complete set of 4 high quality hard coated steel CVD shafts, which are a highly consistent, efficient and durable way to transfer all the power the ground.

Suspension brackets

For adjusting the cars toe-in and track-width, the S400 is equipped with separately mounted suspension brackets on both the front and rear of the car. Each bracket features an easily recognisable number that corresponds to the setting being used and due to the way they are mounted allows the user to easily and accurately adjust their cars settings.

Steering system

The Serpent S400 utilises a centrally mounted steering assembly that contains the servo saver and Ackermann adjustments. Controlled by a side-mounted laydown servo, the steering assembly is ball raced precision and due to its central position it is much lighter than more complex off set steering systems. The tension of the servo saver spring can be adjusted using the supplied adjustment nut.

Bumper

The front bumper has been made from a high impact absorbing foam material and is shaped to protect the entire front end of the car in the event of a crash. The bumper is held in place with a large stylish carbon plate that features the S400 logo cut out of it.

Belt tensioner

Secured to the cars top plate, this machined aluminium piece acts as the mount for the aerial as well as the cars ball raced belt tensioner.

Bearings

The S400 is supplied with high-quality lightweight bearings throughout, making the drive train very efficient and allowing it to run very smoothly.

Belts

The S400 features a 2-belt configuration with a long front and a short rear Kevlar reinforced belt that makes for a super smooth and free drive train.

Manuals & Decals

To allow you to build your car with the greatest of ease, Serpent supplies a full colour instruction manual and integrated reference guide section that contains all the exploded views and latest options. The S400 also comes supplied with a small setup book explaining how to adjust your car and a pair of decal sheets in colour and in chrome finish.

- TH1 TYRE HEATER (타이어 히터, 워머) 제품 설명.

- 전동투어링의 필수품인 타이어 워머

- Main Function

• Input voltage : dc7.2v ~ 15.0v
  
• Quick Warming (20도 ~ 100도)
  
• 3 step warming
  
• Lap timer
  
• Timer
  
• Programmable timer
  
• Celsius-Fahrenheit selectable display
  
• 8 different beep tones
  
• 10 melody
  
• Weight : 505g
  
• Dimensions(mm) : W140.5 x L160 x H53

- USB Connector

• 5v output
  
• Connectors to charge phones, camera`s or Ipod and similar.
  
• PC interface (optional)

- Warming Function

• Front & Rear temperature can be set independently
  
• Temperature of 4 tires is controlled by IC
  
• Includes 4 cups / cables for TC tyres