The Traxxas Slash defines the short course truck segment and sets the standard for durability, performance, and technology. Innovative features like Traxxas Stability Management (TSM), modular chassis design, and ultra-efficient shaft drive complement Slash’s track-tested precision and rock-solid durability. Slash 4X4’s extreme Velineon brushless power provides screaming 60+mph speed while the TQi radio system keeps everything under precise control. With just one drive you will see why the Traxxas Slash 4X4 elevates short course performance to a whole new level.
Slash 4X4 lets you choose the performance you want!
Select the right Traxxas iD battery to fit your needs from the options below
Larger pinion gear/smaller spur gear combinations are for high-speed running on hard, smooth surfaces only.
*With included optional gearing
Choose your charging option with Slash 4X4!
Traxxas iD Auto Battery Identification makes charging simple
|Charging Amperage||4-amp||12-amp |
Slash 4X4's Race Replica bodies come fully decorated with licensed logos and graphics. Each truck is equipped with an accurate representation of the full-size tire, giving Slash 4X4 the ultimate in realistic performance and control. Wheels complete the look; offering equal parts style and strength, Slash 4X4 features a new SCT Split Spoke design and color-molded "beadlock" detail. Fully compatible with factory Traxxas and aftermarket tires, the wheels also feature 12mm hexes and the same offset as Slash 2WD rear wheels.
Slash 4X4 comes fully-assembled and Ready-To-Race® with the TQi 2.4GHz radio system installed and adjusted, Velineon brushless power system, a painted and decaled body, pre-glued tires, and detailed instructions. Simply add the right battery and charger to suit your needs and you're all set. Traxxas backs Slash 4X4 and all of our products with top-notch support that is second to none. A staff of skilled representatives is on-hand to answer your questions via phone, website, or e-mail. Unmatched parts support allows Slash 4X4 to be serviced with parts and support from thousands of hobby dealers worldwide. Your investment is also protected by the Traxxas Lifetime Electronics Warranty. Traxxas goes the extra mile to ensure that your RC experience is easy and fun (and fast!). Follow the details link above to go in depth on all the Slash 4X4 performance benefits and also be sure to check out the videos page to see Slash 4X4 in action for yourself.
MODEL 68086-4: Fully assembled, Ready-To-Race® with Traxxas Stability ManagementTM, TQi™ 2.4GHz radio system, Velineon® Brushless Power System, and Race Replica painted body.
|Length:||22.36 Inches (568mm)|
|Front Track:||11.65 Inches (296mm)|
|Rear Track:||11.65 Inches (296mm)|
|Center Ground Clearance:||2.83 Inches (72mm)|
|Height (overall):||7.60 Inches (193mm)|
|Wheelbase:||12.75 Inches (324mm)|
|Shock Length:||Long (front), XXLong (rear)|
|Tires:||Traxxas 2.2" Pre-Glued with Foam Inserts|
|Tire Diameter:||4.31 Inches (109.5mm) (front and rear)|
|Wheels (front/rear):||2.2" Split-Spoke, Black or Red Beadlock|
|Wheel Diameter:||2.2 Inches (56mm) Outer|
3.0 Inches (76mm) Inner
|Speed Control Type:||VXL-3s™ Electronic Speed Control|
|Motor (electric):||Velineon® 3500 Brushless|
|Overall Drive Ratio:||11.82 (stock, out-of-box)|
|Differential Type:||Hardened Steel Bevel, Sealed, Limited Slip|
|Chassis Structure/Material:||Molded Tub / Nylon Composite|
|Drive System:||Shaft-Driven, Direct Drive 4WD|
|Steering:||Dual-Bellcrank with Integrated Servo Saver|
|Radio System (transmitter)||||TQi™ 2.4GHz (2-channel)|
|Radio System (receiver)||||Traxxas Stability Management™ (#6533)|
|Battery Tray Dimensions:**||165mm x 49.5mm x 23mm, 25mm|
|Required Items:||NiMH or LiPo Battery, Charger, 4 "AA" Batteries (for transmitter)|
|*With optional gearing and 3S LiPo battery (items sold separately)|
**Battery expansion kit available
|Battery:||7-Cell NiMH||7-Cell NiMH||2S LiPo||3S LiPo||3S LiPo|
|mAh:||4000+ mAh||4000+ mAh||4000+ mAh||5000+ mAh||5000+ mAh|
|*Stock Gearing **Included Optional Pinion|
|Input Voltage:||NiMH 4-9 Cells (4.8 to 10.8 Volts DC);|
LiPo 2-3 Cells (7.4 to 11.1 Volts DC)
|Case Size:||39mmW x 55mmD x 33mmH|
|Motor Limit (Brushless):||No motor limit|
|On Resistance Forward:||0.00075 Ohms|
|On Resistance Reverse:||0.00075 Ohms|
|BEC Voltage:||6.0 V|
|Power Wire:||12-Gauge Maxx® Cable|
|Input Harness Wire:||26 Gauge / 100mm|
|Low Voltage Detection:||2-Stage indicators, switchable (on or off)|
|Thermal Protection:||2-Stage thermal shutdown|
|Profile selection:||Sport Mode:|
100% FWD, 100% BRAKES, 100% REV
100% FWD, 100% BRAKES, NO REV
50% FWD, 100% BRAKES, 50% REV
|Single-Button Setup:||Yes, Traxxas EZ-Set®|
|Battery Input Connector :||Traxxas High-Current Connector|
|Motor Types :||Brushless|
|Ports:||RX Input, auxiliary fan|
|For full details, click here.||||*Patented|
Traxxas Stability Management TSM® makes it possible to experience all the extreme power, speed, and acceleration that was engineered into Traxxas models by making it much easier to control the vehicle on common slippery surfaces such as loose dirt, smooth concrete, and even ice and snow. Punch it off the line and TSM goes to work sensing the vehicle’s direction and making steering corrections to provide straight-ahead fullthrottle acceleration without fishtailing, spinouts, and loss of control. TSM also works during cornering, first making intuitive corrections to maintain the vehicle’s line, then hammer the throttle earlier in the turn for much faster exit speeds. Braking is dramatically improved as TSM works to keep Traxxas trucks arrow straight until they come to a complete stop. Traxxas TSM gives all the benefits modern electronic stabilization has to offer without intruding on driving fun or introducing unexpected side effects that can be found on other systems such as drastically reduced turning radius, braking assistance that times out (quits), throttle restrictions, and an overall disconnected driving feel. Traxxas engineers developed superior tuning algorithms that run on high-speed, precision electronic components to create a system that works invisibly, in the background, without ever limiting throttle. TSM can be fine tuned (or turned off) for different surfaces by simply adjusting the multi-function knob on the TQi transmitter, or by adjusting the slider in the Traxxas Link app. The result is driving faster, with more ease, and having more fun. In fact, the driver may not even realize how much TSM is helping until it is turned off and their driving skills are tested without it!
Everything is waterproof and Traxxas-tough as you’d expect. This is short course performance on a whole new level! (click here for more details)
- TSM makes Traxxas vehicles easier to drive, particularly on loose surfaces
- TSM makes driving more fun by allowing the driver to accelerate harder and drive faster with much greater control
- TSM works to stabilize vehicles over rough surfaces as the gyro effect of the spinning front tires continues to “steer” when the vehicle is in the air
- TSM dramatically improves braking performance, preventing the vehicle from spinning out
- TSM allows faster cornering speeds
- TSM never restricts throttle (or fun!)
- TSM allows the driver to accelerate harder when exiting a turn
- TSM works invisibly in the background
- The driver maintains their connected feel with the vehicle
- The amount of TSM assistance is fully adjustable •
- TSM can be turned off or adjusted from the TQi Transmitter
- TSM is fully compatible with Traxxas Link
- TSM does not require any complicated set up or instructions.
Traxxas Slash 4X4 is equipped with the world's most advanced Ready-To-Race® radio system. The all-new Traxxas® TQi™ arrives with a full complement of tuning features and offers the unbeatable convenience of "no channels, no crystals" 2.4GHz technology—but that's just the beginning. Automatic model recognition instantly recalls your settings for up to 30 Traxxas Link-enabled models. Just switch on and drive, no naming or "model memory" settings required. Power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The TQi 2.4GHz transmitter is fully adjustable: steering and throttle end points can be set precisely and the Multi-Function knob can be programmed to control Traxxas Stability Management (TSM), Steering Sensitivity (Expo), Throttle Sensitivity (Expo), Steering Percentage (Dual Rate), Braking Percentage (Dual Rate), or Throttle Trim. TQi's ergonomic case design provides all-day driving comfort, and the unique internal antenna contributes to its sleek, modern look.
Traxxas' exclusive patented Training Mode let's everyone get in on the racing action. Just press a button to limit full-throttle power to 50%. This allows young or new drivers to safely develop their control skills before unlocking full power Traxxas Slash 4X4. Training mode even makes it easy to hand the transmitter over to your friends who have never driven a radio controlled truck before.
The TQi 2.4GHz micro receiver fits easily into any vehicle, and features dual channel-1 outputs for easy installation in vehicles with dual steering servos—no Y-harness necessary! The integrated LINK button makes it fast and easy to bind the receiver, and the two-color LED indicates power-on and bind status for fool-proof control and convenience. Traxxas Link Model Memory allows the receiver to recognize up to thirty TQi 2.4Ghz Traxxas Link enabled transmitters—just switch on and drive. In the event of signal loss due to an accidental switch-off or depleted batteries, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The Fail Safe programming is built-in and does not need to be set or activated. Three telemetry ports are incorporated in the 5-channel receiver to allow real-time data to be transmitted from your Traxxas model to the TQi transmitter.
Slash 4X4's receiver is fully enclosed for protection from the elements. The antenna and servo wires route neatly through a patented watertight seal, and a custom blue O-ring seals the receiver box to protect the receiver from water. The receiver can be removed for service and aftermarket receivers can be installed without losing the sealing properties of the box.
Old designs made servicing of 4-wheel drive vehicles cumbersome and time-consuming. Traxxas has a better way. The Slash 4X4's modular design allows the entire front section to be removed with just five screws, and the rear assembly with just four screws. In less than a minute using a power screwdriver, you have full access for easy service and adjustment.
The Velineon VXL-3s speed control is loaded with high-grade technology to precisely deliver maximum power to the motor. It's engineered for today's battery technology and beyond. Two-stage low voltage detection allows full LiPo compatibility, including powerful 11.1-volt 3S packs!
- Innovative waterproof design
- Three Programmable Drive Profiles:
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
- Integrated on/off switch
- Traxxas EZ-Set® one-button setup
- Large heat sink
- High-efficiency MOSFET transistors
- Built-in two-stage low-voltage detection for LiPo batteries
- NiCad and NiMH battery packs: 4-9 cells (4.8 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
- For more info about the Velineon VXL-3s ESC click here
Extreme performance is standard equipment with the sensorless Velineon motor. Ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor deliver power and long life with near zero maintenance. Since there are no brushes or commutator to wear out, you always get the same blistering acceleration and ballistic top speed run after run.
- Ultra high-temperature sintered Neodymium magnets
- Optimized for power and efficiency in 1/10th scale vehicles
- Consistent, high-power output, run after run
- Low-maintenance, unique Traxxas design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- Protective end cap
- 10-Turn, 3500kV
- Hex hardware
- Brilliant blue-anodizing finish
- Silicon steel laminations
- Delivers more power than comparable brushed motors
- For more info about the Velineon 3500 Brushless motor click here
The patented Traxxas High-Current Connectors are designed to handle high-current applications and funnel maximum power to your vehicle’s electronics.
This super-flexible, high-current, low-resistance 12-gauge, wire acts like a series of giant pipes, flowing energy in and out of the electronic speed control. The patented Traxxas Connector combined with Maxx cable is a better engineered solution for extracting all the power your battery has to give.
Pro-quality, high-grade, metric hex-drive hardware is used throughout for extra strength, and easy maintenance and repair. The black-oxide rust-resistant finish provides a high tech look and feel.
Precision 5x11mm rubber-sealed bearings offer the ultimate in super low-friction performance and maximum protection in dirty environments. They are used in all exposed locations on the truck and are virtually maintenance free.
High-speed off-road action requires rugged, responsive shocks that can take abuse. Traxxas Ultra Shocks are proven tough as stock equipment for Traxxas Maxx trucks. The high-volume body yields large oil capacity, and a silicone bladder separates oil from air within the shock for consistent damping action, even during all-day off-road sessions. Dual X-ring seals give super-smooth performance without weeping or leaking, and Ultra Shocks are fully tunable with a wide range of oils, springs, and pistons.
A race truck needs a powerful steering servo for responsive performance. A Traxxas digital high-torque, ball bearing steering servo comes standard for precision control, quick response, and unmatched torque—all in a waterproof case. It has over 50% more torque than the Rustler's 2056 servo and is 25% faster! That's 125 oz-in torque, 0.16-second speed!
Slash 4X4's center driveshaft is formed from extruded aluminum. There are no dogbones to wear, no drive cups to wobble. The extrusion process allows the shaft to be hollow and lightweight with internal splines that fit directly and securely onto the input shafts of the front and rear drive assemblies. The shaft runs perfectly straight and true and offers superior durability. Traxxas engineers highlighted this important innovation with vivid blue anodizing and a laser-etched Traxxas logo.
Slash 4X4 features a unique mount that holds the Velineon 3500 motor securely yet releases instantly with just one screw. Gear-mesh adjustments are fast and easy and the motor can be removed in just seconds.
Slash 4X4's differentials represent the state of the art in power handling and efficiency. Go ahead, let the throttle rip! Steel gears in the differentials are built to handle brushless power for all the wild action you crave. Precision silicone gaskets and X-ring seals allow the diffs to be tuned for specific running conditions by varying the viscosity of the fluid inside them. Differential access for tuning is quick and easy. Just remove the front or rear cover and the entire differential slides right out.
Slash 4X4's telescoping, universal-joint driveshafts may look familiar but they have evolved for increased strength and articulation. Traxxas U-joint driveshafts allow for maximum suspension movement resulting in longer travel and tighter turning. Extra material and design tweaks greatly increase torque handling. The shafts can even be used to upgrade Slash and other Traxxas models!
Another Traxxas exclusive, Slash 4X4's patented slipper clutch design uses special semi-metallic friction material and finned aluminum alloy pressure plates to dissipate heat and provide consistent traction control. The slipper is easily adjusted without disassembly or removal, and the unique 3-pad design is proven rugged in Traxxas' most powerful electric and nitro vehicles. It's the perfect complement to Velineon brushless power and 4WD, offering the ultimate in traction control.
Extreme brushless horsepower is never an afterthought at Traxxas. The Slash 4X4 driveline is built to handle power for today and accommodate future power upgrades down the road. The spur gear features rugged 0.8 module/32-pitch teeth for total reliability no matter how much power you pour on.
Slash 4X4 has huge amounts of seemingly bottomless, ultra-plush suspension travel for suspension action that swallows up jumps and delivers incredible rough-track control. All that travel gives Slash 4X4 a truly authentic look and handling response that accurately simulates real-world short course racing. The fully-optimized front axle carrier is a result of computer modeling that allowed engineers to design for maximum articulation without binding or interference. Tight steering response is always there, even at the extreme ranges of the suspension travel. Double-shear tie rods and camber links simply can't pop off, so you always stay in control. Robust construction wards off crash damage, and oversized 10x15mm inboard bearings and 5x11mm outboard bearings are incredibly durable and smooth.
No part of Slash 4X4 was overlooked in the quest for durability, precision, and performance. The new dual-bellcrank design pivots on rubber-sealed ball bearings for smooth action in the harshest conditions, and an integrated cam-type servo saver protects the servo gears from crash impacts without sacrificing steering precision.
Slash 4X4's turnbuckles have broad flats that make it easy to set toe-in and camber. The tough steel construction is ultra durable and the captured rod ends won't pop apart during rigorous off-road pounding.
New progressive rate springs are lighter through the initial range of travel to maintain traction and composure over the usual track ruts and bumps. Hit the big jumps and the springs tighten up to prevent bottoming the chassis at the extreme ranges of the suspension travel.
The Traxxas Slash set the standard for short course RC style and the Slash 4X4 carries it to the next level with an even more aggressive and realistic stance. Sharper edges, bolder curves, and proportions that scream speed signal the horsepower that lurks beneath. Body mounting holes are identical to the 2WD Slash.