 |
|
The BEC is a voltage regulator that supplies a constant voltage to the receiver and servo. For ESC with a built-in Linear BEC, it will likely have only a limited ability to supply power to your receiver and servos without overheating protection functions. If you are using a 4 cells LiPo battery or more than a 12 cells NiCd/NiMH battery, you should consider using SkyRC 6S 10A Super Mini S-BEC. This S-BEC is small and light with wide input voltage from 6-25.2V. It is a waterproof BEC with over-current and over-heat protection functions. What's more, it is common for a switching BEC to attain 90% or higher efficiency. |
|
|
 |
|
|
|
|
Compact size(23x23x15mm) and light weight(30g) |
|
Wide input voltage from 6-25.2V (2-6 cells LiPo battery or 5-18 cells |
|
|
NiCd/NiMH battery) |
|
|
Over-current and over-heat protection functions |
|
|
Fully-enclosed design for waterproof(IP67) |
|
|
90% or higher efficiency |
|
|
Less electromagnetic interference |
| |
|
 |
|
|
ESC with built-in BEC
You must disable the built-in BEC functions of the ESC first. Follow the diagram below to disconnect the red wire from the ESC |
|
|
 |
|
|
ESC without built-in BEC
You can leave the red wire intact when using and ESC without BEC |
|
|
 |
|
Dimersions |
|
 |
|
Weight |
|
30g |
|
Input Voltage |
|
6-25.2V DC |
|
Input Leakage Current |
|
≤50ua |
|
Input Idle Current |
|
≤20ua |
|
Output Current |
|
10A |
|
Output Voltage |
|
6V +/- 0.1V |
|
Working Temp |
|
-20-65℃ |
|
Storage Temp |
|
-10-70℃ |
|
Protection |
|
IP54 |
|
Over Heat Protection | |