|
D44 Plastic Complete Front Axle
RC4WD D44 Plastic Complete Front Axle
Specifications:
- Durable Injection Molded Black Nylon
- CNC Machined Super Hardened Steel XVD Axles
- 45° Steering Angle
- Removable Diff Cover
- Double Locked Steering Arm Setup
- Steering Knuckles with 8 degrees of King Pin Angle
- Engineered and Manufactured by RC4WD
- 12mm Steel Wheel Hex
- 5mm Axle Output Shaft
- Weight: 6.75oz / 191g
Shown installed with Rock Hard 4x4 Full Width Front Bumper for Axial SCX10 Jeep (Z-S1338), Axial SCX10 Jeep Rubicon, D44 Link Set for SCX 10CMS (SCX10 Width) (Z-S1072), Chassis Mounted Steering Servo Kit with Panhard Bar for Axial SCX10 (Z-S0923) and RC4WD Jeep JK Rampage Recovery Bumper to fit Axial SCX10 Chassis (Z-S0434) for example (Not Included)
Shown installed on Axial SCX10 Jeep Rubicon with D44 Link Set for SCX 10CMS (SCX10 Width) (Z-S1072), RC4WD 1/10 Warn 9.5cti Winch (Z-S1079), King Kong Tow Shackle (Z-S0093), RC4WD ARB Stubby JK Front Bumper for Axial SCX10 (Z-S1332), Chassis Mounted Steering Servo Kit with Panhard Bar for Axial SCX10 (Z-S0923) and Rok Lox 1.9" Comp Tires (Z-T0093) for example (Not Included)
What's Included:
- 1x RC4WD D44 Plastic Complete Front Axle
Required Parts:
- D44 Link Set for SCX10 CMS (SCX10 Width) (Z-S1072)
- RC4WD D44 Plastic Complete Rear Axle (Z-A0106)
Optional Parts:
- RC4WD Ballistic Fabrications D44 Axle Cover (Z-S1600)
- ARB Diff Cover for D44 Axle (Z-S1607)
- Differential Gear Set for D44 and Axial Axles (Z-G0079)
- D44 Narrow Front Axle Servo Mount (Z-S1742)
- D44 Narrow Front Axle Upper Link Mount (SCX10 Width) (Z-S1024)
- D44 Panhard Mount for SCX10 CMS (SCX10 Width) (Z-S1071)
- Heavy Duty Bevel Gear Set 43T/13T (Z-G0072)
- Heavy Duty Bevel Gear Set 36T/14T (Z-G0080)
- D44 Steering Knuckles (Z-S0955)
Replacement Parts:
- D44 Plastic Front Axle Replacement Parts (Z-A0119)
- Brass Knuckle Bushings for D44 Axle (8) (Z-S1716)
- XVD Axle Shafts for D44 Narrow Front Axle (SCX10 Width) (Z-S0989)
- RC4WD 12mm Axle Wheel Hexes (Z-S0239)
- Heavy Duty Bevel Gear Set 38T/13T (Z-G0071)
- Aluminum Diff Case for D44 and Axial Axles (Z-S1683)
- Heavy Duty Differential Locker (Z-S1682)
- RC4WD Assembly Combo Pack (Oil, Thread Lock, Grease) (Z-S1732)
Replacement Hardware:
- 2x M4 Lock Nuts (Z-S0620)
- 6x Metal Shield Bearing 5x11x4mm (Z-S0683)
- 4x Metal Shield Bearing 10x15x4mm (Z-S0837)
- 4x Steel Socket Head Cap Screw M1.6 X 6mm (Z-S1236)
- 1x Steel Button Head Cap Screws M3 x 12mm (Z-S0654)
- 1x Nylock Nuts M3 (Z-S0629)
- 1x M4 E-clip (Z-S0919)
- 2x Metal Shield Bearing 6x10x3mm (Z-S0680)
- 4x Button Head Self Tapping Screws M3 X 5mm (Black) (Z-S1689)
- 6x Button Head Self Tapping Screws M3 X 10mm (Black) (Z-S1578)
- 4x Socket Head Self Tapping Screws M2 X 6mm (Black) (Z-S1584)
- 1x Flat Head Self Tapping Screws M3 X 10mm (Black) (Z-S1568)
- 4x Button Head Self Tapping Screws M3 X 8mm (Black) (Z-S1576)
Notes:
- Fits Axial Jeep Wrangler Rubicon SCX10. But you will need Z-S1072, Z-S0923, Z-S1105 and Z-A0106.
- Some components may come preassembled. Our assembly team works hard to provide you the best product possible, but it is always a good idea to ensure all hardware is tight and add additional grease to the gears as needed.
- The XVD unit allows for a large amount of steering. In order to prevent premature failure, it's recommended that you set your radio's steering EPA to limit the steering from being maxed out.
|