01.스케일트럭/락클
02.엑시얼/SCX-10
03.드리프트 자동차
04.자동차 키트
05.보트/탱크/바이크
06.MINI-Z/버기
07.미니자동차
08.비행기/시뮬/드론
09.송신기/수신기/서보
10.전동관련제품
11.엔진관련제품
12.브랜드별 상품
13.바디/도료/타이어/LED
14.공구/공구박스/가방
15오일류/심/베어링/나사
16.자동차부품/옵션
17.자동차 공용/벨트/쇽
18.특가상품
19.미니4구/완구/과학
20. 자유/중고판매
21.도매센터

비밀번호 확인 닫기
스케일 트라이얼/RC4WD 스케일 트라이얼/RC4WD > TRAXXAS 킷트/부품 > GPM 옵션 > TRX4ZSP48-OC TRX-4 Defender D110 Interior 디펜더 실내 인테리어
이전상품 TRX4ZSP48-OC TRX-4 Defender D110 Interior 디펜더 실내 인테리어 다음상품
   
제조회사 : GPM
판매가격 : 47,900원
적립금액 : 1%
수량 EA
 

 
 






Accessories:

Interior Part-1pc
Sticker-1pc
Steering Wheel-1pc
Hand Brake -1pc
Glove Compartment-1pc
Gear Stick-1pc
Foot Brake Pedal-1pc

Manual number:
Decoration part

Product major function & usage:
Transparent in color in order for users to paint different colors according to preference.

Other special notes and comments:
Suitable for Traaxxas TRX4 Defender
The interior is directly mounted on the car shell.

Installation Step 1
1. Before applying the color, cut the transparent shell according to the size of the shell and trim off the extra material on the edges.
2. Follow the cutting lines to cut out the center and the seat part.
3. Be careful not to cut too much. More trimming can be done during installation.
4. Apply color once trimming is completed. Note: Remove any oil before coloring.
5. To provide more room, rear body post is recommended to be cut after coloring.

Installation Step 2
1. Once coloring is completed, place stickers according to the corresponding position.
2. Carefully install the steering wheel, foot brake pedal, gear stick and other accessories. The steering wheel is movable, pay attention to the installation direction.

Installation Step 3
1. Install the central part. First, remove the front skid plates.
2. Remove the original screws. Pay attention to whether it is level from the front gear when installing. Tighten the screws after adjustment.

Installation Step 4
1. Installing the seats. First, remove the rear skid plates and spare tire stabilizer.
2. Due to the removal of the spare tire stabilizing parts, if the original spare tire stabilizer is needed, please fix with a locknut.

Installation Step 5
1. Fix the center part and seats with screws.
2. Install the front wheel and skid plates.
3. After installation, raise the front and rear body posts on the original shell by one positioning hole. Note: Each installation may vary, raise or lower the positioning
hole if necessary. 
 
 
 
 
이름 :
내용 :
평점
고객평가 : 평점 ★★★★★  
 
 
 
 
상품에 대해 궁금한 점을 해결해 드립니다.
 
홈