올포알씨에서 해결해드리겠습니다. 미들클라스 하드코어 기자제구성으로 맞추었습니다.
(동네마실이나 애기들과의 커뮤니티주행을 목적으로하신다면 ARR1로 하시면 됩니다)
다만 휠의 경우는 취향이 너무 다양해서 원하시는 메탈휠로 별도구매해서 장착하시면 됩니다.

  .

기자제제원>
SJ-97170.1 GM-GENIUS 120R PRO+T V2 버젼(메인보드 전격교체된 최신형!!)

CR800 Highest Rock Crwaling Servo CR800 (Digital / Full Metal Gear)

* Power Supply 6.0V ~ 7.4V
* Speed : 0.12sec / 60 deg at 7.4V 0.15sec / 60 deg at 6.0V
* Torque : 19.30 kg.cm at 6.0V 23.2 kg.cm at 7.4V
* Size : 39.5 x 20.0 x 38.6 mm

* Weight : 63.8g

97421 SJ PROPO Brushless GM RACE 21.5T

제품설명
	GM RACE 시리즈 모터는 540 사이즈 BLDC 센서드 모터 입니다. 1/10 scale On/Off 로드용 RC 자동차용으로 개발되어 안정적인 성능으로 우수한 토크와 KV 를 제공하며 악조건의 레이싱에서도 발열을 최소화 하여 Pro 레벨의 제어력과 파워, 안정성을 보여 줍니다. 스테이터, 센서 유닛등의 부품을 쉽게 교환하여 업그레이드가 가능하며 센서드, 센서리스에 모두 대응합니다.
제품특징
	• CNC가공 바디사용
	• 180도 스팩의 코일사용
	• 200도 스팩의 Powerful Sintered Neodymium Magnet 사용 (12.5x25mm, 5.5mm inside diameter )
	• 센서드 타입으로 높은 토크와 부드러운 가속성능
	• 전,후진 10도(+/-3단계)의 기구적인 타이밍 조절기능
	• Stator 및 Sensor unit 손상시 쉽게 분리되어 교체 가능
	• NSK 80,000 rpm스팩 베어링 사용
구성품
	Motor Sensor 케이블 150mm(ZHR-6/ZHR-6)

차량제원>

SCX10 II Features:

• AR44 HI-PINION AXLES:
  • High pinion gears for added ground clearance & better driveshaft angles
  • The high pinion design allows increased gear surface contact for increased durability
  • Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
  • Single piece axle housing for added strength
  • Small pumpkin for increased clearance and a more realistic, scale look
  • Front and rear 1-piece lockers
  • Bolt on link mounts
  • Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
  • Optimized gear ratio – 3.75 compared the previous at 2.92 – this reduces torque twist at the axle which is typically seen with other small pumpkin axle designs
• 2000 JEEP® CHEROKEE BODY:
  • Comes with molded scale detail parts (Grill with clear lenses, mirrors, door handles and liftgate trim panel).
  • Clear Body with detailed decal sheet and window masks
• SCX10™ II TRANSMISSION:
  • Transfer case design helps keep the driveshaft’s centered and as low as possible in the chassis
  • Final drive ratio range 33.69 – 54.15 with available spur - pinion gear combinations
  • Comes with 56T spur gear and 15T pinion / 32-pitch for durability
  • All metal internal gears for strength and durability
  • Final drive ratio (FDR) 40.44 with a range from 33.69 - 54.15 - Original SCX10 was 33.06
  • Scale looks mimics a full size transmission and transfer case
• CHASSIS MOUNTED SERVO (CMS):
  • Scale looks with proper suspension geometry
  • Anodized aluminum links included w/ M4 rod ends
  • Adjustable servo mounting system allows for a wide range of servos to be used
  • Properly designed suspension for nearly zero bump steer
• AR44 UNIVERSAL AXLE SET:
  • Up to 45 degrees of steering
  • Smooth action for an efficient drivetrain
  • Compact yet durable design
  • Hardened steel construction
• KINGPIN ANGLE:
  • 8 degree kingpin angle
  • Improved scrub radius over the AX10 axle
• ALL ALUMINUM SUSPENSION LINKS:
  • All links are metal including the steering
  • Custom tapered center - flared ends design
  • Large M4 rod ends
  • Grey anodized aluminum
• 1.9 METHOD MESH WHEELS:
  • Officially licensed METHOD Mesh Wheels are replicated in true form for durability and a clean look.
  • 1.9 BFGOODRICH ALL-TERRAIN T/A® KO2 TIRES - R35:
  • Officially licensed by BFGoodrich
  • 4.65” x 1.65” / 1.9 (118mm x 42.5mm)
  • R35 compound
• ADJUSTABLE WHEELBASE:
  • Wheelbase adjustment is easily done in the rear end without affecting the steering geometry and maintaining zero bump steer.
  • Adjustable wheelbase (11.4”/ 12.0” / 12.3”) with optional links sold separately
  • 4 link rear
  • 12.3” wheelbase
• ICON ALUMINUM SHOCKS:
  • Fully licensed Icon Vehicle Dynamics™ shocks feature clear coated polished aluminum bodies, complete with aluminum faux reservoirs.
  • Main shock body is threaded for quick ride height adjustments and pre-load tuning ability.
  • Completely rebuildable, tunable and offer consistent handling.
  • 61-90mm Aluminum Shock Set with 7mm piston.
• JCR OFFROAD VANGUARD BUMPERS:
  • Scale licensed JCR Offroad front and rear bumpers.
  • Rear mount has been extended and stiffer plastics chosen to help limit the typical sag seen in plastic bumpers.
  • Lenses included for light locations on bumpers.
  • Rear tow hitch included for added scale appearance.
• JCR OFFROAD XJ ROCK SLIDERS:
  • Scale rock sliders licensed by JCR Offroad.
  • Specifically sized to fit the Axial Jeep® Cherokee body.
  • Adjustable widths.
• JCR OFFROAD ROOF RACK:
  • JCR Offroad roof rack with mounting points for optional lights.
• ADJUSTABLE BATTERY TRAY:
  • The adjustable battery tray is now relocated lower and further forward for better weight distribution and center of gravity (COG).
  • Adjustable tray that prevents the battery from coming loose or shifting while driving.
  • Posts are included to fine tune the fit based on the battery you choose.
  • Easy access for quicker battery changes.
  • Can accommodate batteries up to 32x44x147mm (3S 5,000mAh).
• STEEL C-CHANNEL FRAME RAIL CHASSIS:
  • The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware.
  • Realistic looking frame and cross braces improve chassis rigidity (torsional stiffness).
  • Realistic shock hoops with multiple shock mounting positions allows you to adjust your suspension for maximum performance.
  • Simplified design makes maintenance and assembly quick and easy.
  • The contoured skid plate significantly reduces hang-ups on terrain.
  • Compared to the previous design, additional holes have been added to the rear portion of the frame rails for making wheelbase adjustments.
• WIRE ROUTING:
  • Wire routing has been thoroughly thought through to help keep your chassis layout looking clean.
  • In addition to including wire clips/guides, there has been a channel created that runs the length of the chassis so you can run additional wires hidden inside the c-channel frame.
  • Optional mounting points and wire routing for a chassis mounted servo winch and 2 speed shift servo.
• WATERPROOF RECEIVER BOX / ESC TRAY:
  • Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one that acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!
  • Waterproof receiver box located on the side plates allows easy access and low center of gravity.
  • Clean mounting surface for your ESC is large enough to accommodate up to 50x40mm footprint.
• WB8 HD WILDBOAR™ DRIVESHAFTS:
  • WB8 HD Wildboar™ front and rear driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength.
  • A center splined slider floats between each end and features added material which reduces flex and fatigue.
  • 3-piece driveshaft with strengthened slider-floater tube.
  • Increased surface at the connection between the ball joints and output shaft tubes.
  • 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
  • Captured cross pin design eliminates older set screw design for more durability/easy maintenance.
  • Adjustable length driveline parts included in box.

Specifications:
Length: 22.1” (562mm)
Width: 8.9” (226mm)
Height: 10.5” (268mm)
Wheelbase: 12.3” (313mm)
Ground Clearance: 3.0” (77mm)
Weight: 4.5lbs (2.04kg) estimated with electronics

Needed to Complete:

• Transmitter & Receiver
• 1/10 Scale ESC & Motor
• High Torque Steering Servo
• 2S to 3S LiPo Battery (32x44x147mm Max) & Charger
• AA size Batteries for Radio System
• Paint for Body