|
Model:6.5T
KV:5000KV
Maximum Output Power*W:430KV
Resistance(Ohm):0.0062
Current w/o Load Amp:5.5
Current @Max.Output Power*Amp:105
Weight(g):181
Rotor:V10-Ø5-13.0
2 Features
2.1 Avoid incorrect connections between the electr onic speed contr oller (ESC) and the motor .
2.2 All wir es and connections should be well insulated. Short-cir cuits can possibly damage the pr oducts.
2.3 Never allow this pr oduct or other electr onic components to come in contact with water , oil, fuel or other electr
o-conductive liquids. If this happens, stop the use of your pr oduct immediately and let it dry car efully.
2.4 Avoid overloading the motor due to wr ong or too aggr essive gear ratios. Dif ferent ESCs have dif ferent inter
nal timings, follow the ESC instructions.
2.5 Never apply full thr ottle if the pinion is not installed. Due to the extr emely high RPMs without load, the motor can
get damaged.
2.6 Always wir e up all the parts of the equipment car efully. If any of the connections come loose as a r esult of vibration,
your model RC may lose contr ol.
2.7 Avoid soldering longer than 5 seconds at each soldering joint wh en replacing the power wir es to pr event possible
damage to the pr oduct due to overheating of the components. Use a high power soldering station with at least 60W for
soldering.
2.8 Never allow the motor case to get over 100 degr ees Celsius (212 degr ees Fareheit) because the magnets maybe
demagnetized by high temperatur e.
ASSEMBLY AND DISASSEMBLY
The XERUN V10 G2 Motor is very str ong in construction but also easy to disassemble for maintenanc e.
We recommend periodical checking of the bearings and to clean the m otor of dirt.
Please follow the steps in below to assemble the motor . When disassembling the motor , the sequences ar e reversed
Dimension(mm):Can Ø=36,L=52.5,External Shaft Ø=3.175,L=14.6
User Manual（PDF Format） |