For use when converting Dromida vehicles to brushless power, see
COMMENTS below

INCLUDES

7.4V 1600mAh 20C LiPo Battery
Instruction Sheet

REQUIREMENTS

LiPo compatible charger
LiPo charging bag

SPECIFICATIONS

Capacity: 1600mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Continuous Discharge Rate: 20C
Maximum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 0.75" (19mm) long wire w/XH Balance Plug
Discharge Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug
Pack Dimensions: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)
Weight: 3oz (85g) all plugs and wires are included in weights

COMMENTS

**Do not use to power Dromida vehicles with stock brushed power
systems. The stock ESC is not compatible with LiPo batteries.**

ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts